I’ve replaced EVERY external lamp with new. Have lived with the illuminated symbol on the dashboard for eighteen months.Īn imminent Driving Test that will need to be taken in this car, and that the Examiner can cancel the test if any warning lamp is lit, leads me to more thorough checking. Since I’ve had it, the amber lamp like a hanging lightbulb (described as Lighting Control elsewhere) has persistently lit a few seconds after starting. UK Ford Ka MK2 (Fiat 500 derivitive) 1.2L petrol. This causes extreme temperatures and can damage the catalytic converter. This is often an indication of an engine misfire, where unburnt fuel is dumped into the exhaust. This is not an emergency but should be diagnosed and fixed as soon as possible.įlashing: If the light is flashing, your vehicle requires immediate attention. Other faults are often due to a faulty sensor. This will emit harmful exhaust emissions and will likely increase fuel consumption. The light will come on constantly or flash.Ĭonstantly on: Often associated with an emissions fault and an incorrect fuel mixture. You should still have the fault looked into though as in some cases, there is the potential for component damage. The check engine dashboard warning light looks serious but is usually nothing too urgent. The check engine light or malfunction indicator light (MIL) is a generic warning symbol that has many potential faults associated with it. If the warning light is generic and has many potential faults associated with it and if your vehicle doesn’t display fault codes, you’ll either need to have the codes read by an engineer using their own diagnostic equipment, or you’ll need to use your own. Some vehicles display the fault code, whilst others store it in memory but do not display it. When a fault is detected, a warning light is produced along with a fault code. To bring greater attention to the driver, a red light may also flash and/or be accompanied by an audible alarm. Anything illuminating in red requires immediate investigation. Red dashboard warning lights are primary warnings. Amber lights may also be illuminated when something has been deactivated manually when by default, it is active. Amber or Yellow Warning LightsĪmber or yellow dashboard warning lights are usually a secondary warning informing that a system or engine requires servicing or maintenance. Green dashboard warning lights are used to inform the driver that a vehicle utility device has been turned on and is in operation. Turn your headlights on when driving in the dark or in bad weather.Blue dashboard warning lights are usually only associated with full / high beam headlights being in operation, or that something is cold, such as the engine coolant. Tips for driving with proper vehicle lightsĭon’t put yourself and others at risk. ![]() This standard will apply to all new vehicles (cars, trucks, SUVs, 3-wheeled vehicles, motorcycles and heavy trucks). a dashboard that stays dark to alert the driver to turn on the lights.headlights, tail lights, and side marker lights that turn on automatically in the dark.tail lights that come on automatically with daytime running lights.New lighting standardĪs of September 2021 the Canadian Vehicle Lighting Regulation will require that all new vehicles sold in Canada have one of the following: Transport Canada is introducing a new lighting standard to help vehicles and drivers see, and be seen. ![]() It’s also important to use proper lighting in bad weather. Some drivers think a lit-up dashboard means their lights are on, which may not be true. Vehicles driven in the dark without lights, or “phantom vehicles,” are a serious safety risk.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |